artificial teeth
英 [ˌɑːtɪˈfɪʃl tiːθ]
美 [ˌɑːrtɪˈfɪʃl tiːθ]
网络 人工牙; 假牙; 人造牙齿
双语例句
- Objective To observe the clinical effect of recessive artificial teeth repaired of first anterior molar deletion.
目的观察隐形义齿修复第1前磨牙的临床效果。 - Results: The3D coordinate of28 artificial teeth was established and the tooth parameters in the coordinate were obtained.
结果定义了28颗人工牙的坐标系，并得到相应参数在其坐标系下的测量值。 - Results: The geometric feature parameters of28 artificial teeth in their own coordinates were obtained, including the mesiodistal and buccolingual dimension, the height and inclination of cusp.
结果：得到28颗人工牙的颊舌径、近远中径、牙尖高度、中央窝深度、牙尖平衡斜面斜度的数据。 - He has two artificial teeth.
他有两颗假牙。 - The noise made by passing planes set even my artificial teeth on edge.
过往飞机的噪音使我烦得要命。 - Conclusions: the color stability of Bayer artificial teeth are different aiming atdifferent dietary and denture cleanser show favorable effect on removing theirdiscoloration.
结论：拜耳牙对不同饮食色素着色的色彩稳定性不同，义齿清洁剂对其洁美效果良好，值得肯定。 - Any low-fusing alloy used in cheoplasty ( molding artificial teeth).
低熔点合金，用于低熔铸型（假牙成型）。 - Methods: An artificial teeth coordinate was defined based on artificial tooth feature points, which were measured using3D coordinate-measure-machine.
方法根据人工牙特征点来定义一个长方体，从而建立其人工牙坐标系，并采用三坐标测量仪进行特征点参数的测量。 - The cusp balance inclination of tradition anatomic occlusal form artificial teeth is convex, which is a disadvantage factor to set up stable and unhindered chew course.
传统解剖聒型总义齿人工牙凸面的牙尖平衡斜面形态是形成稳定顺畅的咀嚼过程的不利因素。 - Methods: The interfaces of the artificial teeth and resin-injection base were dealt with in four ways. ( 1) the conventional combination of resin tooth and base.
方法：对人工牙和注塑基托界面进行不同处理，即（1）树脂人工牙与注塑基托常规结合； - Results: ⑴ The mathematical model of protrusive movement of arbitrary point on maxillary artificial teeth was established.
结果：⑴建立了人工牙列牙合面上任意点前伸运动轨迹的数学模型。 - Conclusion The cusp inclinations, palatal vaults, and positions of artificial teeth clearly influence the stability and retention of MCD.
结论牙尖斜度、腭穹隆形状、人工牙排列位置对上颌全口义齿的固位与稳定有明显的影响作用。 - Results: The corrosive rate of Cu-Zn alloy framework was 100%. And dislocation of resin artificial teeth, fracture of the framework and adhesion of plaque were observed.
结果：铜-锌合金制作的义齿支架被腐蚀率为100%，并有人工牙齿树脂脱落和支架断裂现象，有菌斑； - The effect of three brands of artificial teeth in complete denture
三种品牌人工牙在全口义齿修复中的性能比较 - Conclusion The palatal vault, cusp inclination and the position of artificial teeth have apparent influence upon the stress concentration on the alveoli dentales maxillae.
结论腭穹隆形状、牙尖斜度和人工牙的排列位置对上颌全口义齿牙槽骨的应力集中状况有明显的影响作用。 - Methods: PFMRPD with the artificial teeth manufactured by fusing porcelain to metal core was applied for14 patients;
方法：选择14例前牙缺失患者，设计PFMRPD，在金属支架上同时铸造金属内核并涂瓷熔附形成人工牙； - Conclusion: SiO2/ PMMA nano-composite can enhanced hardness and wearability of artificial teeth.
结论：SiO2/PMMA纳米复合物可提高义齿人造牙的硬度和耐磨性。 - The artificial teeth arrangement and 3 dimensional show of the complete denture were achieved.
实现了全口义齿人工牙的计算机辅助排列和全口义齿的3D显示。 - This paper introduced the usage of double rows of artificial teeth to restore the deficiency of middle-face on patients of cleft lip and palate.
本文介绍用双重牙列修复唇腭裂患者面中1/3缺陷，其特点是方法简便、效果明显和患者乐意接受。 - Objective To discuss the significance of correction of denture deletion with elastic bionic artificial teeth.
目的探讨弹性仿生义齿在牙列缺失的矫治中的意义。 - Objective: This study analysed the effect of different disposals to the interfaces of artificial teeth and resin-injection bases on their combined ability.
目的：分析不同界面处理对人工牙与注塑基托结合力的影响。 - Clinical Application of Elastic Bionic Artificial Teeth in Denture Deletion
弹性仿生义齿在牙列缺失中的临床应用 - Obiective: To study the stress distributions of modified bar clip implant borne overdenture in the edentulous mandible under vertical loads on the bar and on the artificial teeth.
目的：分析全下颌改良杆卡式种植覆盖义齿种植体固位杆上加载义齿人工牙上加载的应力分布。 - Excessive abrasion on the occlusive surface of artificial teeth in removable denture may lead to lower masticatory efficiency after being used a long time.
可摘义齿在长期使用后，常由于人造牙咬合面过度磨耗导致咬合接触不良、咀嚼效能降低。 - There is instability in 20 dentures, occlusion increasing in 26 dentures and 8 artificial teeth are lost in control group.
对照组有20副义齿出现摆动或翘动，26副义齿出现咬合升高，8副有人工牙脱落。 - Objective: To study the stress distribution in the base of the maxillary complete dentures ( MCD) with palatal vault, cusp inclination and position of artificial teeth so as to provide the theoretical basis for the best design of MCD.
目的：研究不同腭穹隆形状时，人工牙排列位置、牙尖斜度对上颌全口义齿基托应力分布状况的影响，为上颌全口义齿修复的优化设计提供理论依据。 - Study on hardness and wearability of artificial teeth enhanced by SiO_2/ PMMA nano-composite
SiO2/PMMA纳米复合物提高人造牙硬度和耐磨性实验研究 - Currently howling success has been obtained about the research of the artificial joint, the artificial teeth and the heart valve etc* However, various problems seem to be more and more outstanding in the clinical application for the wear of the plant body.
目前，医学领域在人工关节、种植义齿和心脏瓣膜等方面的研究已经取得很大成功，然而，种植体在人体内由于摩擦磨损导致的各种问题在临床应用过程中却显得越来越突出。